Bambu ABS-GFBambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.Enhanced Strength and StiffnessABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.ABSABS-GFImprovement %Stiffness (Bending Modulus – XY)1880 MPa2860 MPa52.1%Strength (Bending Strength – XY)64 MPa68 MPa6.3%Layer Strength (Bending Strength – Z)39 MPa46 MPa17.9%Heat Resistance (HDT, 0.45 MPa)87 °C99 °C13.8%Greater Dimensional StabilityGlass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%Fine Matte FinishThe seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.Water Resistance & Built to LastWith improved water resistance and durability, Bambu ABS-GF is ideal for printing long-lasting production and household items, like mechanical casings, connectors and molds.Accessory CompatibilityRecommendedNot RecommendedBuild PlateSmooth PEI Plate, Textured PEI PlateCool Plate SuperTackHotendHotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mmHotend with Stainless Steel Nozzle All SizeGlueBambu Liquid Glue Glue Stick/Parameters ComparisonLearn more different filaments comparison on Bambu Filament Guide >> ABSABS-GFPA6-GFCompositionAcrylonitrile – butadiene – styreneAcrylonitrile – butadiene – styrene, glass fiberPA6, glass fiberAMS CompatibilityYESYESYESDry Out Before UseRecommendedRecommendedRequiredPrinting Speed< 300 mm/s< 180 mm/s< 130 mm/sPrinter TypeEnclosureEnclosureEnclosureToughness (Impact Strength – XY)39.3 kJ/m²14.5 kJ/m²27.2 kJ/m²Strength (Bending Strength – XY)62 MPa68 MPa120 MPaLayer Strength (Bending Strength – Z)39 MPa46 MPa51 MPaStiffness (Bending Modulus – XY)1880 MPa2860 MPa3670 MPaLayer Adhesion (Impact Strength – Z)7.4 kJ/m²5.3 kJ/m²4.1 kJ/m²Heat Resistance（HDT, 0.45 MPa)87 °C99 °C182 °CSaturated Water Absorption Rate/%（25 °C, 55% RH）0.650.532.56RFID for Intelligent PrintingAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).Load and print! No more tedious setting steps. Recommended Printing SettingsDrying Settings (Blast Drying Oven)80 °C, 8 hPrinting and Keeping Container’s Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature240 – 270 °CBed Temperature (with Glue)80 – 100 °CPrinting Speed< 180 mm/sPhysical PropertiesDensity1.08 g/cm³Vicat Softening Temperature103 °CHeat Deflection Temperature99 °CMelting Temperature202 °CMelt Index7.56 ± 1.4 g/10 minMechanical PropertiesTensile Strength36 ± 3 MPaBreaking Elongation Rate6.3% ± 1.2�nding Modulus2860 ± 130 MPaBending Strength68 ± 4 MPaImpact Strength14.5 ± 1.5 kJ/m²Downloads Filament TDS Filament MSDS Filament RoHS
